Not sure which system?

Carbon Filtration to Remove Chlorine Taste & Odors

Fresh taste, simple add-on: $949 installed, tax included.

No credit card | Licensed local plumber | 15 minutes | Fixed price quote

Activated carbon filter tank cutaway

Is This the Right Solution for Your Water?

You have
Chlorine taste and pool-like smell
What we do
Activated carbon traps chlorine as water flows through.
Result
Fresh-tasting water
You have
Concerns about chemicals in your water
What we do
Carbon captures many common chemicals and organic compounds.
Result
Cleaner water without a complicated system
You have
Wanting a better-tasting glass without a big project
What we do
A simple carbon system with easy filter changes.
Result
Low upkeep and a noticeable improvement

Most city water is disinfected with chlorine or chloramine.

Sources: EPA: disinfectants and byproducts rules

What Carbon Filtration Treats

  • Chlorine taste & odorActivated carbon
  • Musty and chemical odorsActivated carbon
  • Many common chemicalsCarbon media
  • Fine sedimentPre-filter

Results depend on your water. We tell you what to expect before you pay.

See what a system would look like in your home

See if we can help you (2-min quiz)

Take the Quiz

How Carbon Filtration Works: Step-by-Step

  1. 1

    Water enters from your main line

  2. 2

    Sediment pre-filter

    Protects the carbon from particles

    Removes or handles: Sediment

  3. 3

    Activated carbon

    Millions of tiny pores grab contaminants

    Removes or handles: Chlorine, odor, chemicals

  4. 4

    Control head

    Sets flow so the media works as designed

    Removes or handles: Keeps media working

  5. 5

    Filtered water to your home

    Fresh water reaches every tap

    Removes or handles: Taste and smell

  6. 6

    Treated water to your home

Before & After

BeforeAfter

Illustration.

BeforeA glass that smells and tastes like chlorine.

AfterFresh, neutral-tasting water.

Pricing & Installation

Add-on

$949 installed, tax included

Carbon Filtration, installed on the same visit as your whole-home system.

See the whole-home system
  1. Step 1Get your instant price online
  2. Step 2Pick your install day and pay securely
  3. Install dayAbout 4 hours with a licensed local plumber
  4. Day afterSystem testing completed
  5. OngoingAnnual filter replacements, about $150–300 a year

Know your water

Your utility publishes a water report every year. Enter your ZIP to see what it measured, with the source and year.

What Happens After Installation?

How often do filters need replacing?

Typically annually for the sediment filter and every 3–5 years for carbon or resin media. We send reminders.

What’s the annual maintenance cost?

About $150–300 a year for filter cartridges. No technician visits are needed for routine maintenance.

How long does the system last?

Typically 8–10 years for whole-home systems. Some components, like resin, regenerate. Others are replaced.

What if something breaks?

Your warranty covers manufacturing defects. We repair or replace at no cost within the first year.

Can I service it myself?

Filter changes are simple, and we give you guidance. Major repairs are done by a licensed local plumber.

Frequently Asked Questions

Is carbon filtration right for city water or well water?

It is best for city water, where chlorine is the main complaint. On a well we test first, because wells often need iron or bacteria treatment too.

How does carbon compare to reverse osmosis?

Carbon removes chlorine taste and many chemicals and costs less. RO goes further and reduces many dissolved contaminants but treats one tap.

Will carbon remove chloramine?

Standard carbon is less effective on chloramine. We use catalytic carbon when your supply uses it.

What’s the installation process like?

Our technician arrives, shuts off your water for about 4 hours, installs the system, pressure tests it and makes sure everything flows correctly. You are back to normal water use that day.

What warranty do you offer?

A 1-year warranty on all equipment, plus our satisfaction guarantee: if you are not happy, we will adjust or replace.

Can you service my existing system?

Yes. We can maintain or upgrade any water system. We assess it during your free consultation.

Do you serve my area?

Yes. We serve Tacoma, Puyallup, Bremerton, Port Orchard, Olympia, Lacey and surrounding areas.

Serving Pierce, Kitsap & Thurston Counties

Proctor District · North End · South Hill · Downtown Puyallup · Manette · West Bremerton · Downtown Port Orchard · Horseshoe Lake · Downtown Olympia · West Olympia · Hawks Prairie · Woodland District · Tillicum · Lakeview · Chambers Creek · Narrows · Lake Tapps · Allisson Springs · Downtown Waterfront · Harbor Hill and surrounding areas

Ready to Improve Your Water?

(253) 777-0901

✓ Instant price | ✓ Licensed local plumbers | ✓ Pay up front | ✓ 100% refundable

Also interested in