Not sure which system?

City Water Treatment to Reduce Chlorine & Improve Taste

Better tasting city water. Installed as part of our whole-home water system.

No credit card | Licensed local plumber | 15 minutes | Fixed price quote

City water treatment system with softener tank, carbon tank and brine tank

Is This the Right Solution for Your Water?

You have
Chlorine taste and smell from municipal water
What we do
Catalytic carbon reduces chlorine and chloramine taste and odor.
Result
Water that tastes like water
You have
Older pipes, and lead in older homes
What we do
A point-of-use reverse osmosis tap reduces lead at the kitchen sink.
Result
Safer drinking and cooking water
You have
Not sure what is in your city water
What we do
We review your utility’s water quality report with you at your consultation.
Result
A system matched to your water

Homes built before 1986 may have lead pipes, solder or fixtures.

Sources: EPA: lead in drinking water

What City Water Treatment Treats

  • Chlorine and chloramine tasteCatalytic carbon
  • Lead from older plumbingRO at the kitchen tap
  • SedimentPre-filter
  • Hardness (if present)Optional softener

Results depend on your water. We tell you what to expect before you pay.

See what a system would look like in your home

See if we can help you (2-min quiz)

Take the Quiz

How City Water Treatment Works: Step-by-Step

  1. 1

    Water enters from your main line

  2. 2

    Sediment pre-filter

    Catches particles from aging mains and pipes

    Removes or handles: Sediment

  3. 3

    Catalytic carbon

    Reduces chlorine and chloramine taste and odor

    Removes or handles: Chlorine, chloramine

  4. 4

    Optional softener

    Added only if your water is hard

    Removes or handles: Hard water minerals

  5. 5

    Optional RO at the kitchen tap

    Premium drinking water at one faucet

    Removes or handles: Lead and dissolved contaminants

  6. 6

    Treated water to your home

Before & After

BeforeAfter

Illustration.

BeforeChlorine smell and sediment in city tap water.

AfterFresh-tasting water at every tap.

Pricing & Installation

Installed as part of our whole-home system

This service is installed with the Whole-Home Water System. We tell you before you commit if your home needs something different.

See the whole-home system
  1. Step 1Get your instant price online
  2. Step 2Pick your install day and pay securely
  3. Install dayAbout 4 hours with a licensed local plumber
  4. Day afterSystem testing completed
  5. OngoingAnnual filter replacements, about $150–300 a year

Recent Installs

Black filter tank with digital control head and brine tank installed in a garage
Water softener tank and brine tank installed in a garage next to a water heater

Know your water

Your utility publishes a water report every year. Enter your ZIP to see what it measured, with the source and year.

What Happens After Installation?

How often do filters need replacing?

Typically annually for the sediment filter and every 3–5 years for carbon or resin media. We send reminders.

What’s the annual maintenance cost?

About $150–300 a year for filter cartridges. No technician visits are needed for routine maintenance.

How long does the system last?

Typically 8–10 years for whole-home systems. Some components, like resin, regenerate. Others are replaced.

What if something breaks?

Your warranty covers manufacturing defects. We repair or replace at no cost within the first year.

Can I service it myself?

Filter changes are simple, and we give you guidance. Major repairs are done by a licensed local plumber.

Frequently Asked Questions

Is this right for my water type, city or well?

This system is built for city water. If you are on a well, see our well water treatment, and we will test first.

Isn’t city water already treated?

Yes, it is treated and tested. Treatment at home addresses what is left, mainly taste, smell and anything picked up from older plumbing.

Will this remove lead?

A carbon system alone does not. Reverse osmosis at the kitchen tap reduces lead, so we add it if you are in an older home.

What’s the installation process like?

Our technician arrives, shuts off your water for about 4 hours, installs the system, pressure tests it and makes sure everything flows correctly. You are back to normal water use that day.

What warranty do you offer?

A 1-year warranty on all equipment, plus our satisfaction guarantee: if you are not happy, we will adjust or replace.

Can you service my existing system?

Yes. We can maintain or upgrade any water system. We assess it during your free consultation.

Do you serve my area?

Yes. We serve Tacoma, Puyallup, Bremerton, Port Orchard, Olympia, Lacey and surrounding areas.

Serving Pierce, Kitsap & Thurston Counties

Proctor District · North End · South Hill · Downtown Puyallup · Manette · West Bremerton · Downtown Port Orchard · Horseshoe Lake · Downtown Olympia · West Olympia · Hawks Prairie · Woodland District · Tillicum · Lakeview · Chambers Creek · Narrows · Lake Tapps · Allisson Springs · Downtown Waterfront · Harbor Hill and surrounding areas

Ready to Improve Your Water?

(253) 777-0901

✓ Instant price | ✓ Licensed local plumbers | ✓ Pay up front | ✓ 100% refundable

Also interested in